Common Problems With Nest Thermostat And How To Solve Them

If you ever have difficulties with your Nest thermostat, such as no power to the Rh wire or the Nest button not clicking, you have come to the right place. 

Nest Thermostat

We will thoroughly review these issues and use simple troubleshooting techniques to address them. 

Continue reading to learn about other frequent Nest thermostat issues and how to resolve them.

Troubleshooting Common Problems With Nest Thermostat

1. Heating Issues With Nest Thermostat

With a Nest thermostat, you can frequently suffer overheating issues. Your system can create heated air instead of cold air suddenly.

This happens when there is a problem with your electrical system. For example, the wires may overlap and intersect, causing such a problem.

The following are the measures to take if your Nest thermostat is heating instead of cooling:

  • First, switch off the circuit breakers.
  • After that, take a picture of the wiring for future reference.
  • Change the wiring in accordance with the installation manual. You can even go to the Nest app and seek help from the interactive wiring instructions for your convenience.

2. Nest Thermostat Getting Disconnected From Wifi 

Your thermostat may repeatedly disconnect from Wi-Fi owing to a low battery issue, a Nest service issue, or Wi-Fi not operating correctly. In all of these circumstances, you must use certain troubleshooting tricks to eliminate them.

Here are the steps to reconnecting the Nest thermostat to Wi-Fi:

  • Restart your router: Restarting your router may work as quickly as rebooting or refreshing your device. It will resolve all of your Wi-Fi issues. This will also assist you in determining if the problem was caused by the thermostat or the Wi-Fi device.
  • Connect the C wire: This hack may assist in resolving the Nest thermostat’s low battery no Wi-Fi issue. Simply obtain a new wire and attach it to the C wire slot, or remove and repair the G wire. You will solve your problem in any case. If you choose the second option, you may need to replace your HVAC system.
  • Reset your Nest’s Wi-Fi connection: Simply detach your Nest thermostat from the home App and reconnect it. This will assist to refresh the entire system, resolving your issue.

3. Nest Thermostat No Power To Rh Wire 

If your system displays an E74 error message and cannot draw power, the fault might be with the Rh wire. The system might trip one of the breakers, Nest could connect the Rh and Rc wires inefficiently, or there could be a blown fuse in the air handler.

Here are the fixes for the Nest no power to Rh wire issues:

  • First, check to see sure your breakers are in good working order. If they have tripped, turn the breaker off and on again. Check to see if your system is now turned on.
  • Put a red wire in the Rc port and see what happens: First, ensure your Rh and Rc wires are securely connected. However, if you have one wire, ensure it is linked to the Rh port. If you still don’t have electricity after doing so, try inserting the red wire into the Rc port.
  • Replace the blown fuse: If it has blown, just replace it and test the consequences.

4. Nest Thermostat Fan is Not Working

This is a significant red sign if you observe your Nest thermostat going on and off. This will cause all the water to be sucked back into your home rather than blown outside.

Nest Thermostat Fan

In summary, the accumulation of excessive moisture in the system impairs the air conditioner’s operation. It may then have an impact on your thermostat and HVAC system.

The procedures to solve the Nest thermostat fan not working are as follows:

  • To begin, restart your Nest thermostat.
  • Then, reset it to factory settings.
  • Turn off your air conditioner’s fan.
  • Turn off the furnace’s electricity.
  • Finally, change the wires at the terminal such that the G wire goes into the Y1 terminal and the Y1 wire goes into the G terminal. However, make careful to switch off the breakers before proceeding.

Also Read: Reasons to Upgrade to a Smart Thermostat from Your Current One.

5. Don’t forget to switch on your Nest display and your breakers.

These actions will ensure that your fan works correctly. As a result, the cooling system will begin to work.

6. Nest Thermostat Cycling On And Off

Do you know why your Nest thermostat shuts down before it reaches the desired temperature? The furnace problem might cause this. Additionally, debris might block your air filters, causing this aggravating problem.

The following are some possible causes for your thermostat to cycle on and off:

  • The Nest thermostat is broken.
  • The dust has blocked the air filters.
  • Inadequately insulated furnace.
  • The furnace is too big.
  • The furnace has overheated.
  • Your HVAC system may have corroded or troublesome flame sensors.

To rule out the primary reason, you must first examine your system’s settings and ensure they are right. Next, look at the furnace and try to address the problem. If you don’t have any problems, don’t be afraid to contact your specialist for more assistance and repair.

7. Nest Temperature Sensor Not Connecting

Sensor failure is another typical issue with thermostats. For example, your Nest sensor may fail to connect due to the app’s failure to recognize the sensor, a misunderstanding between the thermostat and the sensor, or a heating or cooling issue with the system.

The procedures to resolve the Nest temperature sensor not connecting are as follows:

  • To begin, ensure that your sensor is in the proper location. Assume you’ve positioned it near a window. 
  • In that instance, temperature swings may lead your detector to misinterpret the signal, resulting in a chilly or warm environment.
  • Next, ensure that your sensors are turned on. To do so, open the Nest app and check the sensor activity.

8. Nest Thermostat Not Getting Power 

Another typical problem is that the Nest thermostat does not get electricity, usually due to wiring difficulties. Other possible reasons include a thermostat not linked to a C or standard wire and turning off the HVAC system at the circuit breaker, fuse box, and system switch.

The troubleshooting procedures for the Nest thermostat not turning on are as follows:

  • If you receive a low-battery notice, just charge your system or replace the batteries.
  • If you recently shut down your cooling and heating system at the circuit breaker. Then remember to turn it on.
  • If you install the Nest Power connection and obtain the N260 assistance code, ensure the lid on your HVAC system is closed.

Check out our article on ‘The Gadgets You Will Use In An Electric Future‘.

9. Nest Thermostat Keep Restarting 

Are you experiencing an unexpected restart or reboot of your Nest thermostat? This is usually caused by a blown fuse or a Wi-Fi connectivity issue.

Nest Thermostat Keep Restarting 

Other reasons for this problem include the following:

  • The display is not correctly sealed.
  • A fuse may have blown in the system.
  • Incorrect Wi-Fi connection
  • Incorrect installation of the Nest thermostat on the wall.
  • The gadget is not receiving adequate power.

The steps to resolving this problem are as follows:

  • First, ensure that the connections are correctly seated. If not, replace the connections right away.
  • Improper wiring may also cause your machine to restart often. To avoid a disaster, fix or modify the wiring as soon as feasible.
  • Your home system may have a blown fuse. As a result, if you don’t get enough voltage, just fix it before it’s too late.
  • Connect your gadget via Wi-Fi and turn it on and off quickly. This may quickly resolve the rebooting or resuming issue.


Your thermostat functions as the central processing unit of your heating and cooling system. When this equipment fails to function correctly, your house may become unpleasant. 

We hope these typical thermostat problems and troubleshooting suggestions help you before you contact a professional HVAC provider.

Related Posts